Panduan Lengkap Modem Telkomsel Flash Advan JETZ Lengkap

3G 7.2Mbps 3G Connect Modem User Guide
Welcome to HSPA USB MODEM
3G CONNECT MODEM provides the following functions:
·Accessing to internet
·SMS
·Contacts
·Settings
·Voice
·USSD
Getting 3G CONNECT MODEM Ready
Place the USIM/SIM card into slot, and make sure that the USIM/SIM card is fully in place.
1. Install Guide
1) Connect the 3G Connect Modem with your PC.
2) And then wait 60 second, ensure 3G Connect Modem to install software automatically.
Note:
After Waiting 60 second, if 3G Connect Modem don’t install software automatically, please install
the
Software by yourself, Open from “my computer”, and then to run
“Start.exe”
profile as picture “ ”to begin the installation.
The screen display the windows as below，click“Next”,
Waiting for the computer to automatically install the data card driver, need wait for 2~5 minutes.
After installation is complete, the “HSPA USB MODEM”will be added to the system program
automatically.
And you will see the short icon:
2. Connecting 3G CONNECT MODEM with a PC and Internet
1) After finished Installation, it will display as “P1”
P1
2) Connecting with a user-defined logon profile
Click on and select the menu to open the profile setting window.
“P2”to “P3”
P2
P3
3) If you can see the carrier’s profile in “p3”, click ok. Or add a new connection profile.
Click on to open a new connection profile window: “P4”
P4
If is selected,
Click on , and the edit settings window will pop up; “P5”
P5
After finished fill local network operator information in “New Profile”. such as “P6”
P6
Click on to add it to the available profile list. “p7”
P7
Setting a default connection profile
a. Select one item from the list of available connection profile(s);
Click on in “P7”
P8
b. Click on (P8) to set it as the default profile;
c. Click on ,return main interface;
d. Click on to start the connection using the specified profile.
Connect to the Internet
1. Connecting with the default logon profile
If you want to connect to the Internet without setting any user-defined or predefined profiles,
press . The default connection profile will be used in accordance with your (U)SIM card.
Connecting
Click on from the main window;
Wait several seconds until the connection is established;
Once you are connected, will change into and the connection information
window will appear in the tray bar.
2. Disconnecting
Click on from the main window to disconnect from the Internet.
3. Connection status information
A connection status window will be displayed in the tray bar as soon as you are connected.
Figure 1: Statistics
Figure 2: Statistics
It includes details such as the connection time and volume of data transferred.
Click on for more details on the connection.
Guide to other function
The HSPA USB MODEM is designed to enable PC users access to the Internet via
GPRS/EDGE/UMTS/HSPA networks. It uses a standard USB interface for a fast simple
connection to your PC.
The modem’s firmware includes the following features:
Wireless Internet connection
SMS service
Contact Manager
Settings
Voice
USSD
1. Internet connection
This application will ensure easy connection to the Internet. Users will be able to enjoy a
high-speed data service by clicking on the button in the main window. Users can also
access the connection status in the tray bar, including connection time and volume of data
transferred.
2. SMS service
With the SMS application, users can use the following functions:
New SMS
Edit SMS
Group SMS
Reply
Forward
Save number
Call
Export to PC
Delete
3. Contacts
Includes 2 memories: PC and (U)SIM card.
It supports the following functions:
New
Edit
Send SMS
Import and export vCard file
Export text file
Copy to PC and (U)SIM card
Delete
Search
Call
4. Settings
This contains the following settings:
Network mode
Network selection
PIN enable/disable
Modify PIN
Connection profile settings
Diagnostics
SMS settings
System settings
Help
About
5. Voice
With the Voice application, users can use the following functions:
Call/Answer
Ring off
Call history
Set volume
6. USSD
With this interface, users can use the USSD service if your carrier’s network support it.
Main interface introduction
1. Icon Functions
/ : Connect / disconnect to Internet
: Access the SMS service window
: Access the contact management window
: Set parameters of the software
: Access the voice service window
:Access the USSD service window
2. Status bar information
Current network operator name will be displayed on the status bar.
If no device is found, “No device”is displayed
If no SIM card is found, “No (U)SIM card”is displayed
If the SIM card is invalid, “Invalid (U)SIM card”is displayed
During Initialization, “Initializing”is displayed
If searching for the network, “Searching”is displayed
If no network is found,”No service”is displayed
3. Signal status bar
: Indicates the signal strength of the current connected network
Network type:
is displayed when GSM/GPRS is connected
is displayed when UMTS is connected
Support data service:
is displayed if HSPA is available
is displayed if EDGE is available
Nothing is displayed if GPRS support is available
: Indicates that there is an unread SMS in the main interface
: Indicates that the (U)SIM card’s memory is full
4. Tray Icon
If you click on , the main window is closed and the tray icon will appear in the tray bar. The
main window can be reopened by double clicking on the tray icon.
5. System tray menu
Open: Opens the main window
Connect/Disconnect: Connects/disconnects to the Internet
Statistics: Displays connection status information
Contacts: Opens contact management window
SMS: Opens SMS service window
About: Application version
Exit: Exits the application
Entrance to main interface
The application runs automatically and the main window will pop up when a device is connected.
Users can also access and run the application from the menu.
If the PIN code is enabled, please enter the correct PIN code in the entry field, and click on .
Users may try only 3 times to enter the correct PIN code; after three incorrect attempts, the
(U)SIM card will be blocked.
A PUK dialog box will then be displayed asking the user to enter the right PUK code. Click on
, and a default PIN code will be retrieved. If you fail to input the correct PUK code after 10
attempts, you will need to contact your service provider.
If the PIN code is correct, the application will be launched and all features are enabled.
Figure1: Main window
SMS Service
Click on in the main window to access the SMS service interface.
You can select at the bottom of the screen to switch to the contacts management
window.
1. Displaying the received SMS
When a new message is received, a message box appears in the tray bar.
Click on in the box to access the inbox or click on ;
Left-click to show the content of the chosen message. You may also display the content by
double-clicking on the message.
Note: Received SMS will be saved on the (U)SIM card if the main window is closed, otherwise
saved on the PC.
2. New SMS
Click on in the shortcut menu bar. An SMS creation window will pop up;
Enter the text.
3. Send
(1) You may enter a recipient’s number in 3 ways:
Enter the number directly. If there are two or more recipients, use “,”to separate each;
Enter the name of a recipient saved in the phonebook;
Click on to access the recipients selection window. Select one party, or more (using the
ctrl/shift key), and then click on to add the chosen party(ies) to the recipient list.
(2) Click on to send the message. If the message is not sent, it will be saved in the
Outbox.
4. Reply
Select a message in the inbox and then click on in the shortcut menu bar;
The recipient’s number will appear in the field. It can now be modified;
Enter the reply in input field, and then click on .
5. Forward
Select a message and then click on in the shortcut menu bar;
The content of the selected message will appear in the input field. It can now be modified;
Enter the recipient’s number and then click on .
6. Edit
Access the draft list to select a message, and open it by double-clicking on it;
Click on or when you have finished editing.
7. Delete
Select a message, or several messages (using the ctrl/shift key);
Click on in the tool bar. A dialog box will ask “Are you sure to delete?”“Are you sure
you would like to delete?”
Click on and the SMS will be deleted. Once deleted, SMS messages cannot be restored.
8. Resend
Access the outbox to select a message or several messages (using the ctrl/shift key);
Click on in the tool bar;
The application will resend the unsent message(s).
9. Export
Select a message or several messages (using the ctrl/shift key) in the current list;
Click on the menu and on . A window will prompt for the location on your PC
where the file should be stored;
Click on to confirm. The SMS will be exported to the chosen location and saved as a *.txt
file.
Contacts
Press from the main window to access the contacts management interface.
The contacts list column contains: All / PC / (U)SIM. Users can use contacts stored either on the
PC or on the (U)SIM card in the corresponding window.
1. New
Select from the tool bar to access the contacts editor;
Enter the relevant information, and press ; the new contact will appear in the current contact
list.
2. Edit
Select a contact and access the contact editor by selecting from the tool bar or by
double-clicking on the contact;
Modify the relevant contact information, and select to save the changes.
3. Delete
Select one contact, or more (using the ctrl/shift key);
Click on from the tool bar. A dialog box will ask “Are you sure to delete?”; “Are you
sure you would like to delete?”
Click on and the contact(s) will be deleted; deleted contacts will not be restored.
4. Send SMS
Select one contact or more (using ctrl/shift key);
Click on in the tool bar;
When the message is completed, you may send it by clicking on .
5. Copy to (U) SIM card/PC
Select one contact, or more (using ctrl/shift key) stored in the same memory;
Click on in the tool bar and select a target memory different from the memory being
used;
Contact(s) will be copied to the target memory.
6. Search
Enter the key words or numbers in the empty field in the tool bar;
The system will find entries which match the key word(s);
7. Export
Select one or more contacts by pressing the ctrl/shift key from the current list;
Click on menu and select ; select the export text or a vCard file. A window will
pop up requesting the location on the PC where the contacts should be stored.
Click on to confirm, and the contact(s) will be exported to the chosen location and saved as
a *.txt or *.vcf file.
8. Import
Click on the menu and select . A window will pop up requesting the vCard file to
be imported.
Click on to confirm and the contact(s) will be imported to the current window.
Settings
Click on from the main window. A menu with various settings will appear.
1. Network mode
Select in menu. (The default according to the (U)SIM network type in
connecting establishment.)
Click / / , it will search and register the
network mode which was chosen at next time of device connection.
2. Network selection
Select in the menu. The default setting is ;
Click on to activate the network list window;
A list of networks appears when the search is complete;
Select an available network from the list of available operators and click on . It will
register the selected network.
3. Request PIN
Click on the menu and select . Activate the PIN input dialog
box;
Enter the correct PIN code;
Click on . You will see the following message “PIN code has been enabled (disabled)”.
4. Modify PIN
Click on , and activate the PIN modify dialog box;
Input the old PIN and the new PIN, then confirm;
Click on to confirm the new PIN code
Note: You can only access the modify menu if the PIN is enabled.
5. Connection profile settings
Select in the menu to access the connection profile setting
window. All available connection profiles are listed.
Adding a new connection profile
Click on to open a new connection profile window:
1. If is selected
Click on , and the edit settings window will pop up;
Enter any profile such as APN;
Click on to add it to the available profile list.
2. If is selected
Click on , and a predefined list will appear on the pop up window;
Select one item in the predefined profile list;
Click on to add it to the available profile list.
Note: Users may obtain APN information from their operator.
Edit
Select an item in the connection profile list;
Click on to access the profile edit window;
Modify the parameters and click on to save the modification.
Delete
Select an item in the connection profile list;
Click on on the keyboard. You will be asked if you are sure you want to delete;
Choose to delete the profile from the list.
Set a default connection profile
Select one item from the list of available connection profile(s);
Click on to specify set it as the default profile;
Click on to start the connection using a specified profile.
6. SMS settings
Choose in the menu to access the SMS settings window.
SMS center number
The default number is found in the (U)SIM card. You may change it.
SMS validity period
You can choose between: 1 hour/6 hours/1 day/1 week/maximum.
SMS validity period
Click to √validate the message alert sound.
You can choose *.wav file saved in the PC using the option.
7. System settings
Click to √validate the sound prompt when the Internet will be connected/ disconnected.
8. About & help
You can get information on the version in the menu.
If you need help, click on to access the help document.
Voice
Click on in the main window to access the voice service interface.
1. Call/Answer
Input the telephone number and click on to make a call. If there is a coming call, press
this button to answer it.
2. Ring off
Click on button to end or reject a voice call.
3. Call history
Press to acess the call history.
4.Set Volume
Drag the volume bar to change the volume.
USSD
Click on in the main window to access the USSD service interface.
FAQ
1. Q: Which operation systems does the software support?
A: It supports Windows 2000, Windows XP, and Windows Vista.
2. Q: The software does not auto-run when the device is plugged in.
Situation1: if there is no notification from the PC, please check if the auto-run has been disabled
by Windows.
Situation2: If the device remains on the U-disk, please check if an anti-virus application has
disabled the auto-run.
A: Please launch the software manually if you do not change the configuration of your PC.
3. Q: I cannot install the driver
A: On some PCs, installation of the driver may take a long time because of the PC configuration.
So please wait and do not cancel the process or you will have to uninstall and re-install again.
4. Q: What should I do if the main window continues to display “Searching device”?
A: Please remove the device and reinsert it.
5. Q: What should I do if the (U)SIM card is unplugged during the application?
A: Please disconnect the device first, and then restart the
application.
6. Q: The (U)SIM card does not register any networks
A: The reasons are shown below:
1. Unstable local signal;
2. The software is an old version;
3.Hardware problem.
You may:
1. Try to logon from another location;
2. Update the software;
3. Check the hardware or use another data card and retry.
7. Q: Why does the prompt “Unavailable connection profile”appear?
A: Please add a connection profile manually.
8. Q: It failed to connect to the internet
A: Please make sure the connection profile and settings are correct.
9. Q: Sending an SMS failed
A: Please make sure the SMS center number is correct.
10. Q: I can not receive an SMS
A: Please check whether your (U)SIM card’s memory is full.
11. Q: Why can I only save part of the name when adding a new contact?
A: The (U)SIM card can only hold 12 SBC characters, and 6 DBC characters.